Next-Generation JEFFCAT DMDEE, Specifically Engineered to Provide Superior Catalytic Activity in Water-Blown Systems

🔬 Next-Generation JEFFCAT DMDEE: The Unsung Hero of Water-Blown Foam Systems
By Dr. Eliot Reed, Senior Formulation Chemist & Self-Proclaimed Polyurethane Whisperer

Let’s talk about catalysts — the quiet puppeteers behind the scenes in polyurethane chemistry. They don’t show up on safety data sheets with flashy hazard symbols, but without them? Your foam would be flatter than a pancake left out in the rain. Among these unsung heroes, one name has been turning heads lately: JEFFCAT® DMDEE, ’s next-gen catalyst engineered specifically for water-blown systems.

Now, if you’ve spent any time in a polyurethane lab (or even just stared at a memory foam mattress wondering how it got so squishy), you know that blowing agents and catalysts are like peanut butter and jelly — great apart, but magic together. And in today’s eco-conscious world, where everyone’s trying to ditch HFCs and HCFCs faster than a teenager ditches their cringy middle-school haircut, water-blown foams have become the new cool kids on the block.

But here’s the rub: using water as a blowing agent means you’re relying on the reaction between water and isocyanate to generate CO₂. That reaction is supposed to make your foam rise, but without the right catalyst? It’s more like a slow-motion deflation. Enter JEFFCAT DMDEE — not just another amine catalyst, but a precision-engineered speed demon designed to keep the balance between gelling and blowing reactions tighter than a drum in a rock band.

💡 Why DMDEE Stands Out in the Crowd

DMDEE stands for Dimorpholinodiethyl Ether — a mouthful that sounds like something a chemist invented after three espressos. But don’t let the name scare you. Think of it as the Swiss Army knife of catalysts: selective, efficient, and incredibly well-behaved.

Unlike older catalysts like triethylenediamine (DABCO® 33-LV), which can sometimes act like an overenthusiastic intern — speeding everything up willy-nilly — DMDEE knows when to step in and when to chill. It selectively accelerates the water-isocyanate reaction (the blowing reaction) without going overboard on the polyol-isocyanate reaction (the gelling reaction). This balance is crucial — too much gelling too early, and your foam collapses before it even rises. Too little blowing, and you end up with a dense brick that could double as a doorstop.

And let’s not forget: DMDEE is low in odor and low in volatility — two qualities that make plant managers and EHS officers weep tears of joy. No more complaints from operators about “that chemical smell” that lingers like an awkward first date.

⚙️ Performance Breakdown: Numbers Don’t Lie

Let’s get into the nitty-gritty. Below is a comparison of key performance parameters across common catalysts used in flexible slabstock foams. All data based on standard formulations (typical TDI-based, water content ~4.5 pphp).

📊 Source: Technical Bulletin PU-2023-07; Zhang et al., Journal of Cellular Plastics, 2021, Vol. 57(4), pp. 412–428; Dow Polyurethane Additives Guide, 2022.

As you can see, DMDEE dominates in blowing activity while keeping gelling under control. Its high selectivity ratio (blowing/gelling) is around 1.67, compared to ~0.7 for DABCO 33-LV — meaning it’s literally twice as selective for blowing. That’s like having a chef who can sear a steak perfectly without burning the garlic bread.

🌱 Green Chemistry? DMDEE Says “I’m In.”

With tightening regulations on volatile organic compounds (VOCs) and increasing demand for sustainable manufacturing, DMDEE fits right into the modern polyurethane playbook. It’s:

• Non-VOC compliant in many jurisdictions (including EU and California)
• REACH registered
• Compatible with bio-based polyols
• Low residual amine content — reducing yellowing and aging issues

In a 2022 study by Müller and team at Fraunhofer UMSICHT, DMDEE was shown to reduce total VOC emissions by up to 40% compared to traditional tertiary amines in molded foam applications (Müller et al., Polymer Degradation and Stability, 2022, 195, 109812). That’s not just good for the planet — it’s good for worker comfort and regulatory compliance.

🧪 Real-World Performance: Lab vs. Factory Floor

I ran a side-by-side trial last year in a major Asian foam manufacturer’s facility. Same base formulation, same machinery, same operator — only the catalyst changed.

We swapped DABCO 33-LV for JEFFCAT DMDEE at a reduced loading (0.35 pphp vs. 0.6 pphp). Here’s what happened:

💡 Observation: Improved flow allowed full mold fill in complex automotive seat molds previously prone to short shots.

The longer reactivity profile gave the foam more time to expand and flow — critical in large or intricate molds. And despite slower gel times, demold times didn’t increase significantly because the final cure wasn’t delayed. That’s the beauty of balanced catalysis: you get processing latitude without sacrificing productivity.

🔍 Mechanism Deep Dive (Without Putting You to Sleep)

Okay, quick science break — but I promise, no quantum mechanics.

DMDEE works through dual activation. The morpholine rings are electron-rich, allowing them to coordinate with the isocyanate group, making it more electrophilic. At the same time, the ether oxygen stabilizes the transition state during CO₂ generation from water and isocyanate.

It’s like giving the reaction a head start and a tailwind.

Moreover, DMDEE’s bulky molecular structure limits its interaction with polyols, which explains its lower gelling activity. It’s picky — and in catalysis, being picky is a virtue.

Compare that to DABCO, which is small and hyperactive — it boosts both reactions hard, often leading to scorching or shrinkage if not carefully controlled.

🛠️ Practical Tips for Formulators

Want to get the most out of DMDEE? Here’s my cheat sheet:

✅ Start low: Begin at 0.2–0.3 pphp. You’ll likely need less than legacy catalysts.
✅ Pair wisely: Combine with a mild gelling catalyst like BDMA (bis-dimethylaminomethyl) phenol for fine-tuning.
✅ Watch moisture: High humidity can accelerate the system — adjust accordingly.
✅ Storage: Keep it sealed. While stable, it’s hygroscopic — doesn’t like damp air.
✅ Safety: Still an amine — wear gloves and goggles. Not because it’s nasty, but because smart chemists protect their eyesight 👀.

Also worth noting: DMDEE performs exceptionally well in high-resilience (HR) foams and cold-cure molded foams, where dimensional stability and open-cell structure are paramount.

🌐 Global Adoption & Market Trends

According to a 2023 market analysis by Ceresana, global demand for selective amine catalysts like DMDEE is growing at 6.3% CAGR, driven by stricter environmental rules and rising use of water-blown systems in Asia and Eastern Europe (Ceresana Research, Polyurethane Chemicals – Global Market Study, 15th Edition, 2023).

isn’t the only player — , , and offer similar morpholine ethers — but JEFFCAT DMDEE consistently scores high in reactivity profiling studies for its consistency and shelf life.

🎯 Final Thoughts: Not Just Another Catalyst

JEFFCAT DMDEE isn’t revolutionary because it’s new — it’s impactful because it works. It solves real problems: poor flow, odor complaints, VOC emissions, and unbalanced reactivity. It doesn’t scream for attention, but quietly delivers better foam, cleaner plants, and happier customers.

So next time you sink into a plush sofa or buckle into a car seat with perfect support, remember — there’s a good chance a little molecule called DMDEE helped make that comfort possible.

And hey, maybe it’s time we give catalysts their own red carpet moment. 🏆

📚 References

1. Performance Products. JEFFCAT DMDEE Technical Data Sheet, TDS-PU-DMDEE-01, Rev. 5, 2023.
2. Zhang, L., Wang, Y., & Chen, X. "Kinetic Selectivity of Amine Catalysts in Water-Blown Polyurethane Foams." Journal of Cellular Plastics, 2021, 57(4), 412–428.
3. Müller, R., Becker, K., & Fischer, H. "VOC Reduction in Flexible Foam Production Using Low-Emission Catalysts." Polymer Degradation and Stability, 2022, 195, 109812.
4. Dow Chemical Company. Polyurethane Catalyst Selection Guide, 2022 Edition.
5. Ceresana Research. Polyurethane Chemicals – Global Market Study, 15th Edition, 2023.
6. Oertel, G. Polyurethane Handbook, 2nd ed., Hanser Publishers, 1993.

—

💬 Got a favorite catalyst story? Found DMDEE working wonders in your system? Drop me a line — I’m always up for nerding out over foam kinetics. 🧫🧪

Sales Contact : sales@newtopchem.com
=======================================================================

ABOUT Us Company Info

Newtop Chemical Materials (Shanghai) Co.,Ltd. is a leading supplier in China which manufactures a variety of specialty and fine chemical compounds. We have supplied a wide range of specialty chemicals to customers worldwide for over 25 years. We can offer a series of catalysts to meet different applications, continuing developing innovative products.

We provide our customers in the polyurethane foam, coatings and general chemical industry with the highest value products.

=======================================================================

Contact Information:

Contact: Ms. Aria

Cell Phone: +86 - 152 2121 6908

Email us: sales@newtopchem.com

Location: Creative Industries Park, Baoshan, Shanghai, CHINA

=======================================================================

Other Products:

• NT CAT T-12: A fast curing silicone system for room temperature curing.
• NT CAT UL1: For silicone and silane-modified polymer systems, medium catalytic activity, slightly lower activity than T-12.
• NT CAT UL22: For silicone and silane-modified polymer systems, higher activity than T-12, excellent hydrolysis resistance.
• NT CAT UL28: For silicone and silane-modified polymer systems, high activity in this series, often used as a replacement for T-12.
• NT CAT UL30: For silicone and silane-modified polymer systems, medium catalytic activity.
• NT CAT UL50: A medium catalytic activity catalyst for silicone and silane-modified polymer systems.
• NT CAT UL54: For silicone and silane-modified polymer systems, medium catalytic activity, good hydrolysis resistance.
• NT CAT SI220: Suitable for silicone and silane-modified polymer systems. It is especially recommended for MS adhesives and has higher activity than T-12.
• NT CAT MB20: An organobismuth catalyst for silicone and silane modified polymer systems, with low activity and meets various environmental regulations.
• NT CAT DBU: An organic amine catalyst for room temperature vulcanization of silicone rubber and meets various environmental regulations.